A STEADY-STATE APPROACH TO PREVENT VOLTAGE COLLAPSE IN POWER SYSTEM

This paper presents a steady state approach to prevent voltage collapse in a power system. The power systemoperation close to stability boundaries is an important factor which may lead to voltage instability conditions. Thereare different ways to prevent voltage collapse in the power system; one of...

Descripción completa

Autores Principales: Quirós Tortós, Jairo, Araya Padilla, Eddie
Formato: Artículo
Idioma: Español
Publicado: Universidad de Costa Rica 2013
Acceso en línea: http://revistas.ucr.ac.cr/index.php/ingenieria/article/view/11691
http://hdl.handle.net/10669/24562
Sumario: This paper presents a steady state approach to prevent voltage collapse in a power system. The power systemoperation close to stability boundaries is an important factor which may lead to voltage instability conditions. Thereare different ways to prevent voltage collapse in the power system; one of this is the correct coordination of theprotection devices to avoid undesirable equipment disconnections.This paper proposes a new method to coordinatethe back-up zone in the distance protection scheme. The methodology uses both Optimal Power Flow (OPF) andContinuation Power Flow (CPF) solutions to determine the impedance seen by the relay. These impedances are latercompared to conclude which is the best option to set the parameter for the back-up zone in the relay. The methodologyalso considers the distance to Maximum Loading Point (MLP) and the corresponding Voltage Collapse Point(VCP). Therefore, undesirable disconnections can be avoided when the power system operates close to the stabilityboundaries. In order to demonstrate and validate the methodology, simulations are carried out on the IEEE 14-bus testsystem using MATLAB.